Advanced Military and Humanitarian Shelters Worldwide

Carbon Maintenance Shelter – CIZ 1600/400/877

CARBON HYBRID Maintenance Shelter – The most cutting edge materials and innovation have been combined to create the HTS-RDS CARBON HYBRID Maintenance Shelter. The structures are much stronger than a comparable conventional shelter system and will withstand far higher snow and wind loads. They are also much lighter and smaller packaged than a traditional counterpart- achieving up to 35% less weight and up to 50% less volume.

Product Specifications

Technical Characteristics
Technical Characteristics
- Structure: European – hard pressed extruded structural aluminium
- Main profile size: 200 / 110 / 3.5 mm (4 Channel) CARBON-ALUMINIUM hybrid profile
- Connection components: European – hot dipped, structural grade corrosive resistant galvanised steel
- Covering: Robust industrial grade PVC, 650g/m² coated polyester fabric. Flame retardant according to DIN 4102 B1, M2, BS 5438/7837, USA NFPA701
Comparison of the two profiles below for a structure having the same load performance highlights the difference in size and weight between the traditional profile (A) and the new Profile CARBON-HYBRID (B).
Dimensions
Technical Dimensions
- Width: 16.00m
- Minimum length: 5.00m
- Extension (unlimited): 5.00m
- Side height: 4.10m
- Peak height: 8.77m
- Bay distance: 5.00m
- Snow load: 100 kg/m²
- Wind load: 100 km/h
- Temperature operative range: -40°C to +80°C

Technical Features

Structure

Frame made out of extruded 4-channel-profiles
CARBON-ALUMINIUM hybrid profile, EN AW-6005 T6
Galvanized steel plate eave and ridge connector
Each front and rear bay with 2 gable uprights
Base plates made out of Steel – S235
Purlins made out of extruded Aluminium profiles
Including set up equipment
Ground anchors made out of steel, galvanized

Covers

Usable from both sides
One door on each gable side/ end field (1.20 m x 2.10 m)
Roof cover with windows on both sides and in the central position, each window with welded mosquito netting, transparent flap and outer flap
Pipelines for HVAC and cables systems
Mudflap fixed at covers end
Mudflap made out of PVC, same colour as the roof cover
High frequency welded
Waterproof
Putrefaction-restraining (anti-fungicidal)
Bar tensioned
Packbags for each cover part of the tent, bags made out of PVC material

Cover Spec

Type of coating:	PVC
Finish:	UV-protected
Standard colour outside:	Outside olive-green – RAL 6031
Standard colour inside:	White
High-quality PVC:	650 gr/ sqm – EN ISO 2286-2
Tensile strength – warp/ weft:	2500 / 2500 N/5cm – EN ISO 1421/V1
Tear resistance – warp/ weft:	250 N / 250 N – DIN 53363
Adhesion:	20 N/cm – PA 09.03
Cold resistance:	– 40 °C – EN 1876-1
High Temperature:	+70 °C – PA 07.04
Light fastness:	>6 Note, Value – EN ISO 105 B02
Crack resistance:	100000 x – DIN 53359 A
Yarn count:	1100 dtex – ISO 2060
Flame retardant according to:	BS 7837, California T 19, D.M. 26.06.84 (UNI9177): CL. 2, DIN 4102: B1, NFP 92507: M2, NFPA 701 Test 2, EN 13501-1: B-s2-d0

Packaging Dimensions
Packaging Dimensions

Standard Tent (16.00m x 20.00m)
- Longest part: 3.60m
- Weight (approx.): 3.100.00 kg
- Transport dimensions: 1/2 x 20 ft Container
Accessories
Additional Accessories
- Sunshade cover and insulation liners for better climate inside the tent
- Different types of flooring systems available
- Electrical equipment (Distribution boxes, lighting systems, cables…)
- Heating, ventilation, air conditioning – System (HVAC)
- Complete camp solution, including supply, installation, maintenance and much more
Röder HTS Höcker GmbH provides an unlimited range of accessories to support its range of military and relief shelter systems.

Technical Characteristics

Structure: European – hard pressed extruded structural aluminium
Main profile size: 200 / 110 / 3.5 mm (4 Channel) CARBON-ALUMINIUM hybrid profile
Connection components: European – hot dipped, structural grade corrosive resistant galvanised steel
Covering: Robust industrial grade PVC, 650g/m² coated polyester fabric. Flame retardant according to DIN 4102 B1, M2, BS 5438/7837, USA NFPA701

Comparison of the two profiles below for a structure having the same load performance highlights the difference in size and weight between the traditional profile (A) and the new Profile CARBON-HYBRID (B).

Technical Dimensions

Width: 16.00m
Minimum length: 5.00m
Extension (unlimited): 5.00m
Side height: 4.10m
Peak height: 8.77m
Bay distance: 5.00m
Snow load: 100 kg/m²
Wind load: 100 km/h
Temperature operative range: -40°C to +80°C

Technical Features

Structure

Frame made out of extruded 4-channel-profiles
CARBON-ALUMINIUM hybrid profile, EN AW-6005 T6
Galvanized steel plate eave and ridge connector
Each front and rear bay with 2 gable uprights
Base plates made out of Steel – S235
Purlins made out of extruded Aluminium profiles
Including set up equipment
Ground anchors made out of steel, galvanized

Covers

Usable from both sides
One door on each gable side/ end field (1.20 m x 2.10 m)
Roof cover with windows on both sides and in the central position, each window with welded mosquito netting, transparent flap and outer flap
Pipelines for HVAC and cables systems
Mudflap fixed at covers end
Mudflap made out of PVC, same colour as the roof cover
High frequency welded
Waterproof
Putrefaction-restraining (anti-fungicidal)
Bar tensioned
Packbags for each cover part of the tent, bags made out of PVC material

Cover Spec

Type of coating:	PVC
Finish:	UV-protected
Standard colour outside:	Outside olive-green – RAL 6031
Standard colour inside:	White
High-quality PVC:	650 gr/ sqm – EN ISO 2286-2
Tensile strength – warp/ weft:	2500 / 2500 N/5cm – EN ISO 1421/V1
Tear resistance – warp/ weft:	250 N / 250 N – DIN 53363
Adhesion:	20 N/cm – PA 09.03
Cold resistance:	– 40 °C – EN 1876-1
High Temperature:	+70 °C – PA 07.04
Light fastness:	>6 Note, Value – EN ISO 105 B02
Crack resistance:	100000 x – DIN 53359 A
Yarn count:	1100 dtex – ISO 2060
Flame retardant according to:	BS 7837, California T 19, D.M. 26.06.84 (UNI9177): CL. 2, DIN 4102: B1, NFP 92507: M2, NFPA 701 Test 2, EN 13501-1: B-s2-d0

Packaging Dimensions

Standard Tent (16.00m x 20.00m)

Longest part: 3.60m
Weight (approx.): 3.100.00 kg
Transport dimensions: 1/2 x 20 ft Container

Additional Accessories

Sunshade cover and insulation liners for better climate inside the tent
Different types of flooring systems available
Electrical equipment (Distribution boxes, lighting systems, cables…)
Heating, ventilation, air conditioning – System (HVAC)
Complete camp solution, including supply, installation, maintenance and much more

Röder HTS Höcker GmbH provides an unlimited range of accessories to support its range of military and relief shelter systems.

Download PDF Enquire About This Product